FTI Custom Hydraulic Roller Camshaft Kit - (Ford Windsor)
All our small block Ford custom hydraulic roller camshaft profiles and the matching valvetrain components, are designed per each customer's individual application. No repackaged of catalog camshafts or inferior overseas valvetrain peripherals like our competition. Every facet of your build is taken into consideration. Street, track, endurance or off road, we have you covered!
Completion of the CAM TECH form required.
These dual purpose camshaft grinds require long tube headers and free flowing mufflers & exhaust system. These severe duty grinds used in EFI applications will not work with factory computers without modifications and professional tuning. All FlowTech custom hydraulic roller camshafts are ground on billet steel cores and will require a coated steel, composite or bronze distributor gear.
These premium series camshaft kits include:
- Custom designed billet steel hydraulic roller camshaft
- 1.30" diameter dual valve spring package - .650" max lift
- One-piece, 5/16" x .083" wall, hardened push rods
Custom camshaft profiles will range from:
- Duration @ .006" Tappet Lift Range: 242° through 330°+
- Duration @ .050" Tappet Lift Range: 204° through 278°+
- Gross Valve Lift Range: .450"/.650"+
- Lobe Separation Range: 106° through 118°
- RPM Range: Depends entirely on your combination
NOTES:
- Rocker arm geometry, lifter preload & push rod length must be verified before starting the engine.
- Lifter preload is very important for maximum performance and must be checked & verified.
- All hydraulic roller camshafts are ground on the late model 302HO/351W firing order. (1-3-7-2-6-5-4-8)
PART NUMBER: FTI-SBF-HR-CAM KIT-B2
