FTI Custom Solid Roller Camshaft Kit - (AFR 185-195 Renegade)
All our small block Ford custom solid roller camshaft profiles and the matching valvetrain components, are designed per each customer's individual application utilizing the proven AFR "Renegade" series 185cc-195cc cylinder heads. These solid roller camshaft kits are not repackaged generic catalog camshafts nor do we include any inferior overseas valvetrain peripherals as seen on many big box mail-order stores. Every single facet of your project is taken into consideration. Street, track, endurance or off road, we have you covered!
Completion of the CAM TECH form required.
All custom solid roller camshafts are ground on billet steel cores and will require a coated steel, composite or bronze distributor gear.
These dual purpose camshaft grinds require long tube headers and free flowing mufflers and exhaust system.
These premium series camshaft kits include:
- Custom designed billet steel solid roller camshaft
- Morel "Racer Series" billet steel solid roller lifters
- PAC Racing dual valve springs
- Tool steel valve spring retainers
- Hardened & machined 7° valve locks
- Hardened & machined spring locators
- Steel shell viton valve seals
Custom camshaft profiles will range from:
- Duration @ .020" Tappet Lift Range: 256° through 330°+
- Duration @ .050" Tappet Lift Range: 226° through 300°+
- Gross Valve Lift Range: .550"/.750"+
- Lobe Separation Range: 106° through 115°
- RPM Range: Depends entirely on the combination you are building
NOTES:
- Rocker arm geometry and push rod length must be checked & verified before starting the engine.
- Valve stem diameter, keeper groove type, valve guide seal & shoulder diameter must be provided.
- All custom solid roller camshafts are ground on the late model 302HO/351W firing order. (1-3-7-2-6-5-4-8)
- Push rods are NOT included with this kit - You must measure for correct length and order separately.
PART NUMBER: FTI-SBF-SR-CAM KIT-B2-AFR
